Lineshaft Driven Constant Tension Infeed
Overview:
The Martin Lineshaft Driven Infeed is available in single , double, and triple web units. Each infeed is custom designed to meet the requirements of your press. Standard models are available from 20 through 49 inches. For wide web applications, 50 inches and greater, please consult Martin with your specific needs. Web guiding system is included as an integral part of each infeed.
Specifications: **
Maximum Roll Diameter | to 3.5 IN | to 89 MM |
Tension Accuracy | within 1 LB or 1% of set tension, whichever is greater | |
Maximum Tension Per Inch | to 10 LBS/IN | to 179 KG/M |
Web Guide | Will respond to any error greater than .005 IN ±1 IN correction (depending on web guide option) |
** Specifications for the Martin Lineshaft Driven Constant Tension Infeed are meant as a general guideline. The Martin Lineshaft Driven Constant Tension Infeed can be application-engineered to fit each process. Contact Martin Automatic for your specific needs.
Features:
- Patented inertia-compensated dancer
- Easily adjustable web tension
- Permanently-lubricated, low-friction bearings
- Web entry at any angle
- Web entry at specified height
- Dancer assembly designed to accommodate half-web at full tension without distortion
- All solid state components on plug-in printed circuit board
- Two speed DC clutch drive in standard unit provides dependable tension control without complex electronics
- Pre-wired. External wiring connects at junction box.
- "Power-on" light on control console goes out if fuse opens.
- Precision regulator for setting tension
- Rolling diaphragm pneumatic cylinders
Requirements:
Electrical | 117/220 VAC ±10% 50 or 60 HZ 300 VAC per web | |
Pneumatic | to 80 PSI | to 5 ATM |
As with all Martin products, the Martin Lineshaft Driven Constant Tension Infeed can be application-engineered to fit each process. Contact Martin Automatic for your specific needs.